| |
 |
Optional Power Window Switches |
 |
 |
MODEL |
IMAGE / DESCRIPTION |
87SW3 |
![[click here to enlarge]](87SW3sm.jpg)
Upgraded power window sitch & wiring harness kit.
This kit is similar to the 80SW3 harness that has a "pwer booster" relay. The difference is that the switches in this kit have been upgraded - the switches are illuminated arrow (lighted switches) and has bullet type, 4-wire & 5 wire terminal connections. Switches may be, mounted with or without the "switch frames" (monting bezel). Driver-side has two 4-wire switches, with 2 hole switch framem and the passenger side has one 5-wire switch, with a 1 hole switch frame. Recommended as a replacement power window harness for 2-door vehicles.
|
81SW7 |
![[click here to enlarge]](81SW7sm.jpg)
Seven (7) stenciled-arrow awitched & harness system. For 4-door vehicles.
This kit includes plug-in type switches, (with "gang-type" mounting bezel & integrated rear lockout switch) & colorcoded wiring harness: 4-gang type switches for the Driver-side, plus rear lock switch & 3 switches for the passenger & rear doors. Switches are non-illuminated with "up and down arrow" mark.
|
87SW7 |
![[click here to enlarge]](87SW7sm.jpg)
Upgraded power window switch & wiring harness kit..
Similar in construction and design as the 87SW3 switch & wire harness kit. For 4-Door application. This kit comes with 7 switches and one (rear) lock-out switch - which can be installed with or without its "switch frames" (mounting frame or bezel). The driver-side has 4-wire switches, mounted on 4 hole switch frame (with a lock switch); and three individual 5-wire switches (each with a 1-jole switch frame) for the passenger and rear doors.
|
80124 |

2 or 4 Door application POD kit.
Aside from covering the trim panel hole (where the manual handcrank of the manual window used to be before conversation to power windows), these 2 and 4 POD kit is capable of housing the power window switches & power door lock switch in its single bezel or cover. Though not as stylist as the 80122-B, the 80124 is also paint-able to match the anterior trim panel. Its individual bezel that holds the switches comes in 1, 2, 3, & 4 hole (bezels). For use only with 80SW3 and 80SW7 switches.
|
|
|
|
 |
 |
|
 |
|
 |
|
|
|
|